Surface finish
Powder Coating for CNC & Molded Parts
Powder coating sprays dry powder that bakes into a tough, colorful, chip-resistant skin.
- Thick, durable, and colorful finish.
- Resists chips, scratches, and rust.
Surface finish
Powder coating sprays dry powder that bakes into a tough, colorful, chip-resistant skin.
What it is
Powder coating uses electrostatically charged dry powder. The powder sticks to the grounded part, then a bake melts it into a smooth, solid film. It is thicker and tougher than liquid paint and contains no solvents.
How it works
Pre-treat & clean
We degrease and sometimes phosphate the part.
Electrostatic spray
Charged powder clings evenly to the part.
Cure in oven
Heat melts and bonds the powder into a film.
Inspect
We check thickness, color, and adhesion.
Why choose it
Handles impact and abrasion well.
Matches RAL, Pantone, or samples.
Seals metal from moisture and salt.
Electrostatic spray coats uniformly.
Environmentally cleaner than wet paint.
Typical specs
| Specification | Typical range / value | Notes |
|---|---|---|
| Film thickness | 40 – 120 µm | |
| Cure temp | 160 – 200 °C | |
| Finish | Matte / satin / gloss / texture | |
| Base materials | Steel, aluminium, galvanized steel |
Best applications
Frames, guards, and enclosures.
Wheels, brackets, and trim.
White goods panels.
Weather-resistant coatings.
Materials
We apply Powder Coating to the materials below. Not sure if your material qualifies? Our engineers will confirm it for free.
Our solution
We powder coat steel and aluminium with durable, colorful finishes. We prep, coat, and cure in-house with thickness and adhesion checks.
Design tips
We match RAL, Pantone, or a chip.
Powder builds in holes; mask as needed.
Cure is hot; confirm material can take it.
FAQ