Surface finish
A brushed finish adds a fine, directional grain to metal. It hides scratches and gives a soft, modern look.
What it is
Brushed finishing uses an abrasive belt or pad to create many fine, parallel lines on the surface. The direction of the grain is consistent. This look is common on appliances, electronics, and decorative metal. It also hides small scratches better than a mirror polish.
How it works
Prep surface
We start from a clean, even base, often sanded first.
Brush with abrasive
An abrasive belt or pad moves in one direction to cut the grain.
Refine grain
We step through finer abrasives for a consistent look.
Clean & protect
We remove residue and apply a light protectant if needed.
Why choose it
Soft satin appearance loved by designers.
The uniform grain masks daily wear.
Smooth direction wipes clean fast.
Shows the real metal tone.
Typical specs
| Specification | Typical range / value | Notes |
|---|---|---|
| Grain | Directional, often 120–240 grit | |
| Surface roughness | Ra 0.4 – 1.0 µm | |
| Base materials | Aluminium, stainless steel, brass | |
| Color | Natural metal tone |
Best applications
Housings and panels.
Kitchen and office equipment.
Handrails, trims, and fittings.
Knobs, nameplates, and bezels.
Materials
We apply Brushed Finish to the materials below. Not sure if your material qualifies? Our engineers will confirm it for free.
Our solution
We brush aluminium and stainless with a consistent grain direction. We match your sample or specify a standard grit for repeatable results.
Design tips
Show the arrow on your drawing.
Brushing can lighten or darken the metal.
Add clear coat or anodize for corrosion zones.
FAQ