Material
Stainless steel is a strong, rust-proof metal. We cut, bend, and weld it into clean, durable parts.
Overview
Stainless steel is a strong, rust-proof metal. We cut, bend, and weld it into clean, durable parts.
Stainless steel sheet resists rust and looks clean. We cut, bend, and weld it into enclosures, brackets, and panels that last outdoors and in food or medical use.
We cut, bend, and join flat metal sheets into strong, light parts.
Brackets, enclosures, and panels made to your spec, in low or high volume.
Specifications
Typical reference values for Stainless Steel through sheet metal. Final numbers can vary with grade and part shape.
| Property | Typical Value |
|---|---|
| Material type | Stainless Steel sheet |
| Manufacturing process | Sheet Metal Fabrication |
| Density | 7.9 g/cm³ |
| Tensile strength | 500–750 MPa |
| Service temperature | up to 800 °C |
| Standard finishes | Brushed, polishing, passivation |
Values are typical reference data and may vary with grade, heat treatment, and part geometry. Tell us your needs and we will confirm exact specs.
Why Stainless
No rust, even in wet or salty air.
Bright, modern, hygienic finish.
Holds up under load and wear.
Easy to sanitize.
Material Options
We stock common grades. Tell us your need and we will pick the right one.
The standard, all-purpose grade.
Best for marine and chemical use.
Lower cost, magnetic, decorative.
How It Works
From your file to a finished part in five clear steps. Start with a free quote.
Upload your drawings or STEP file. Get a quote with free DFM feedback, usually within 24 hours.
Our engineers check bend radius, flanges, and holes. We suggest changes that cut cost.
We laser cut or punch the flat sheet to the exact shape you need.
We bend and form the parts on press brakes into the final shape.
We weld, finish, and inspect each part, then pack and ship worldwide.
Applications
Clean housings for electronics and labs.
Structural and mounting parts.
Sanitary equipment and trays.
Cladding, rails, and trims.
Design Tips
New to this process? These simple rules help your part turn out well and cost less.
Keep the inner bend radius at least equal to the material thickness to avoid cracks.
Add enough straight length beside bends so the press brake can grip the part.
Holes should be at least equal to the thickness from an edge and sized for clean punching.
Finishes
A hard, colored coating that protects aluminum and looks clean.
A durable painted layer in many colors for indoor or outdoor use.
A uniform matte texture that hides scratches.
A custom liquid paint finish for branding or matching.
Why YiguProto
We are a dedicated factory for sheet metal. Every file is reviewed by engineers before production. Every part is inspected before shipping. Your designs stay private with us.
FAQ