Material
Titanium is a strong, light, biocompatible metal. We machine it into precise, high-value parts.
Overview
Titanium is a strong, light, biocompatible metal. We machine it into precise, high-value parts.
Titanium (Ti-6Al-4V) is a strong, light metal. It is harder to machine than steel, but we use sharp tools and the right speeds to cut precise, high-value parts.
Computer-controlled mills and lathes cut a solid block into a precise part.
Tight-tolerance parts for prototypes or production, finished to your drawing.
Specifications
Typical reference values for Titanium (Ti-6Al-4V) through cnc machining. Final numbers can vary with grade and part shape.
| Property | Typical Value |
|---|---|
| Material type | Titanium (Ti-6Al-4V) |
| Manufacturing process | CNC Machining |
| Density | 4.43 g/cm³ |
| Tensile strength | 900–1100 MPa |
| Service temperature | up to 400 °C |
| Standard finishes | Polishing, anodizing, passivation |
Values are typical reference data and may vary with grade, heat treatment, and part geometry. Tell us your needs and we will confirm exact specs.
Why Titanium
As strong as steel at half the weight.
Great for weight-saving parts.
Rust-proof in harsh environments.
Safe for medical implants.
Material Options
We stock common grades. Tell us your need and we will pick the right one.
The standard, strong grade.
Softer, very corrosion resistant.
Same as Ti-6Al-4V, common name.
How It Works
From your file to a finished part in five clear steps. Start with a free quote.
Upload your STEP or STL file and drawings. Get a clear, factory-direct quote with free DFM feedback, usually within 24 hours.
Our engineers check wall thickness, tolerances, and features. We suggest changes that save cost and improve quality.
We cut your part from a solid block with mills and lathes in our machine shop.
We remove burrs, then apply the finish you need, such as polishing or plating.
We measure and inspect each part, then pack and ship worldwide with full tracking.
Applications
Implants and surgical tools.
Brackets, fittings, and frames.
Saltwater-proof components.
Premium, light hardware.
Design Tips
New to this process? These simple rules help your part turn out well and cost less.
Keep walls thick enough to stay rigid. Thin areas can vibrate and warp during cutting.
Tight tolerances cost more. Only specify them where the function needs them.
Small chamfers and radii help tools last longer and parts look cleaner.
Finishes
The natural milled surface. Good for most functional parts.
A smoother, brighter surface for looks or low friction.
Nickel, chrome, or other coatings for corrosion or wear protection.
A chemical treatment that boosts corrosion resistance on some metals.
Why YiguProto
We are a dedicated factory for cnc machining. Every file is reviewed by engineers before production. Every part is inspected before shipping. Your designs stay private with us.
FAQ